India is an underdeveloped country it means lot of infrastructures is necessary to accelerate the growth of the country and for building infrastructure country need to have a lot of construction. JCB is an important machine if we talk about construction whether we are building roads, tunnels, flyovers or any other big project. JCB not only makes the work faster but is also built to work efficiently. As a JCB operator or driver, you need to thoroughly undergo the JCB service manuals. This is because these machines are bigger than usual and are rather complex than others. If you know the operation and maintenance of the machine, then these machines become easy to work with, but if you do not know how to work with this machine or do not properly maintain it, these machines can prove to be fatal.
JCB service manuals is a booklet guide provided by the manufacturer giving all the information about the machine and how to use the various tools which are provided along with the machine in times of emergency condition or during an accident on the road.
Overall the JCB workshop manuals will include all the information regarding the safety and caution that has to be taken while workshop procedures. During service of the JCB the components of the vehicle will be cleaned and lubricated where necessary, and any open hose or pipe connection must be blanked to prevent leakage of hydraulic fluid and deposition of dirt.
Hydraulics play an essential role in the basic working of JCB as it involves the work of lifting and displacing of heavy bodies which require a lot of power to work with and therefore hydraulics engineering was used in the working of JCB. So knowing the in and outs of hydraulics will be beneficial for the operator to work smoothly with the vehicle and during service of the vehicle special attention should be given to the cleaning and lubrication of hydraulic components. Special equipment is provided to check the pressure of the hydraulics like the hydraulic circuit pressure test kit.
The JCB workshop manuals will include various cautions and warnings like you should wear proper cloth while working and do not wear loose cloths as they can get caught in the machinery. As the vehicle works with lifting equipment, the operator make sure that the lifting equipment is in good condition and the operator should not let anyone walk under raised attachments unless they are safely blocked. The driver should not powershift transmission, i.e., he should not suddenly change from a high gear to low gear while the machine is moving. While changing the gears, the operator should allow the engine speed to drop.
There are various service tools like hand cleaner, cartridge gun, 12v mobile oven, folding stand for holding glass, wire starter, cut-out knife, glass extractor, L blades, braided cutting wire, long knife, nylon spatula etc. which can play an important role in the cleaning of the components of the machine during the service of the vehicle.